Model WAP200
Standards IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u,
IEEE802.3af (Power Over Ethernet), 802.1p (QoS priority),
802.1q (VLAN), 802.1X (Security Authentication),
802.11i - Ready (Security WPA2), 802.11e - Ready (Wireless QoS),
802.11F (Wireless Roaming)
Ports 10BASE-T/100BASE-TX Ethernet, 12 VDC Power
Buttons Reset
Cabling Type UTP CAT 5
LEDs Power, PoE, Wireless, Ethernet
Operating System Linux
Setup/Config
WebUI Built-in Web UI for Easy Browser-based Configuration (HTTP/HTTPS)
Management
SNMP Version SNMP Version 1, 2c, 3
Event Logging E-mail Notification
Remote Syslog
Web F/W upgrade Firmware Upgradable Through Web-Browser
Diags: Flash, etc. Diags: Flash, RAM, LAN, WLAN
DHCP DHCP Client
Operating Modes
Access Point Access Point Mode, Point-to-Point Bridge Mode,
Point-to-Multipoint Bridge Mode, Repeater Mode
Wireless
Spec/Modulation Radio and Modulation Type: 802.11b/DSSS, 11g/OFDM
Channels Operating Channels: 11 North America,
13 Most of Europe (ETSI and Japan)
# of External Ant. 2 (Omni-Directional) SMA detachable
Transmit Power Transmit Power (Adjustable) @ Normal Temp Range:
11b - 18~19 dBm; 11g - 14~15 dBm
Antenna Gain in dBi 2
Receiver Sensitivity 11.g: 54 Mbps@ -72 dBm, 11.b: 11 Mbps@ -85 dBM
Security
WEP/WPA/WPA2 WEP 64-Bit/128-Bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT
Access Control Wireless Connection Control: MAC-Based
SSID Broadcast SSID Broadcast Enable/Disable
802.1X IEEE 802.1X support
Wireless Client Isolation Wireless Client Devices Can Be Isolated from Each Other
either within an SSID or between Two SSIDs
Wireless Security Monitor Scan and Classify Wireless Devices in the Network
Report New Client and AP joining Network and Suspicious Network Events
(Works together with 200 Business series client adapters):
1. Intrusion Alarms (e.g., Rogue Client Detected, Spoofed MAC address)
2. Denial of Service Alarms (e.g., Duration Attack, Association Table Full)
3. Vulnerability Alarms
(e.g., AP is not using encryption, AP is broadcasting SSID)
4. Other Alarms (e.g., Low speed connection)
Quality of Service
QoS 4 Queues
WMM Wireless Priority
General
Wireless Roaming Based on IAPP
Auto-channel Selection
Environmental
Dimensions 6.69" x 8.07" x 7.68"
W x H x D 170 x 205 x 195 mm
Unit Weight 0.88 lb (0.4 kg)
Power 12V 1A DC Input, and IEEE 802.3af Compliant PoE
Max Power Draw: 3.36 W
Certification FCC, ICES-003, CE
Operating Temperature 32 to 104.F (0 to 40.C)
Storage Temperature -4 to 158.F (20 to 70.C)
Operating Humidity 10 to 85% Noncondensing
Storage Humidity 5 to 90% Noncondensing
Package Contents
Wireless-G Access Point with Power Over Ethernet and RangeBooster•
2 x SMA detachable Dipole antenna•
User Guide on CD-ROM •
Ethernet Network Cable •
Power Adapter •
Product Stands •
Registration Card •
Minimum Requirements
802.11b, 802.11g Wireless Adapter With TCP/IP Protocol Installed Per PC•
Switch/Router with Power Over Ethernet (PoE) Support Or PoE Injector when used with PoE•
Web-Based Configuration Java-Enabled Web Browser•